Table of Contents
Advertisement
32
Connecting Your TV
Connecting remote IR devices
To connect the IR blaster cable:
1
Locate the infrared sensor on the front of your device. This sensor
is marked on some devices. If you are having issues locating the
device's infrared sensor, see
infrared sensor:" on page
2
Align one of the IR blaster cable's wands approximately 1 inch
away from the infrared sensor on the front of the device and attach
it using double-sided mounting tape. If you have a second device,
attach the second wand in a similar manner.
NOTE
3
Plug the IR blaster cable's plug into the TV's IR Blaster Out
terminal.
Infrared
sensor
IR blaster cable wand
(approx. 1 inch from device)
(Sample Illustration) L7400U Series—Using the IR blaster OUT
terminal
If you do not have a second device, coil the second wand with a rubber
band and leave it behind the TV.
Front of IR-controlled DVD player (for example)
Front of IR-controlled audio device (for example)
IR OUT
"If you cannot locate the device's
33.
TV back panel
Dual-
wand IR
blaster
cable
Advertisement
Table of Contents
