Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - Chevrolet Silverado Classic 2007 Owner's Manual

Hide thumbs Also See for Silverado Classic 2007:
Table of Contents

Advertisement

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
Turn and Lane Change Signals. See
G
Turn and Lane-Change Signals on page 212.
Headlamp High/Low-Beam Changer.
53
See Headlamp High/Low-Beam Changer
on page 213.
Flash-to-Pass. See Flash-to-Pass on page 213.
Windshield Wipers. See Windshield Wipers
N
on page 214.
212
Windshield Washer. See Windshield
L
Washer on page 215.
I
Cruise Control. See Cruise Control
on page 215.
For information on the headlamps, see
Headlamps on page 219.

Turn and Lane-Change Signals

The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up
or down. When the turn is finished, the lever will
return automatically.
To signal a lane change, raise or lower the
lever for less than one second until the arrow
starts to flash. This will cause the turn signals
to automatically flash three times. It will flash
six times if tow-haul mode is active. Holding
the turn signal lever for more than one second will
cause the turn signals to flash until you release
the lever. The lever will return by itself when
it is released.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents