Front Turn Signal, Sidemarker And Daytime Running Lamps - Chevrolet Silverado Classic 2007 Owner's Manual

6. Put the new bulb into the assembly and turn it
clockwise until it is tight.
7. Plug in the electrical connector.
8. Reinstall the headlamp assembly.
9. Install the pin and turn it into the locking
feature.
Front Turn Signal, Sidemarker and
Daytime Running Lamps
To replace a front turn signal, sidemarker, or
Daytime Running Lamp (DRL) bulb, do the
following:
1. Remove the headlamp assembly as
mentioned previously. See Headlamps
on page 534 for more information.
2. Press the retainer clip, located behind the turn
signal assembly, towards the outside of the
vehicle.
535