Colour Function Keys (Copy Mode) - Ricoh Aficio 1224C Settings Manual

{ { { { Interrupt} } } } key (copy mode)
13.
Press to make interrupt copies during a
copy run.
14.
Main power indicator and pow-
er indicator
The main power indicator goes on when
you turn on the main power switch.
The power indicator lights when the
power is on.
Important
❒ Do not turn off the power while
the power indicator is blinking.
Doing so may damage the hard
disk.
15.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
{ { { { Sample Copy} } } } key
16.
Press to make a single set of copies or
prints to check for poor copying or print-
ing before making multiple sets of copies
or prints.
{ { { { Start} } } } key
17.
Press to start copying, scanning, or print-
ing documents stored on the Document
Server.
{ { { { Clear/Stop} } } } key
18.
• Clear
Press to delete a number entered.
• Stop
Press to stop a job such as scanning
facsimile, or printing in progress.
{ { { { #} } } } key
19.
Press to enter a value.
20.
Number keys
Use to enter the desired number of copies
and data for selected modes.
{ { { { Tone} } } } key (facsimile mode)
21.
Press to send tonal signals down a pulse
dialing line.
{ { { { Pause/Redial} } } } key (facsimile
22.
mode)
• Pause
Insert a pause when you are dialing or
storing a fax number. A pause cannot
be inserted as the first digit.
• Redial
Press to redial the last numbers.
23.
Colour function keys (copy
mode)
Press to select colour for copying.
24.
Function keys/Function Status
indicator
Press to select the following functions:
• Copy:
• Document Server:
• Facsimile:
• Printer:
• Scanner:
The followings show the status of the
above functions:
• Yellow: the function is selected.
• Green: the function is active.
• Red: the function has been interrupt-
ed.
25. m indicator m
m m
The data indicator shows the status of
data reception from a personal computer.
Control Panel
2
13