Turning Off The Power; Turning Off The Main Power - Ricoh Aficio 1224C Settings Manual

Turning Off the Power

A A A A
Make sure that the exposure glass
cover or the document feeder is in
the right position.
B B B B
Press the operation switch to
make the On indicator go off.
Note
❒ Even if you press the operation
switch, the indicator does not
go off and blinks in the follow-
ing cases:
• When the exposure glass or
the document feeder is open
• When communication is in
p r o g r e s s w i t h e x t e r n a l
equipment
• When the hard disk is oper-
ating

Turning Off the Main Power

Important
❒ Do not turn off the main power
switch when the On indicator is on
or blinking. Failure to observe this
may result in damage to the hard
disk or memory.
❒ Pull out the power plug after you
turn off the main power switch.
Failure to observe this may result
in damage to the hard disk or
memory.
A A A A
Make sure that the On indicator is
off.
B B B B
Open the switch cover, and turn
off the main power switch to
make the Main Power indicator
go off.
- When a facsimile unit (option) -
- -
is installed
When the main power switch is
turned off while using the fax func-
tion, waiting fax jobs and print jobs
may be canceled, and incoming fax
documents cannot be received. When
you have to turn off this switch for
some reason, follow the procedure
below.
Important
❒ Make sure that 100% is shown on
the display before you turn the
main power switch is off or unplug
the power cord. Fax files pro-
grammed in memory will be delet-
ed an hour after you turn the main
power switch off or unplug the
power cord.
❒ The On indicator does not go off
and blinks in dial-in mode even if
you press the operation switch. In
such a case, check the items below,
and turn the main power switch
off.
• When the exposure glass cover
or the document feeder is open
• When the computer is control-
ling the machine
Turning On the Power
21
2