Installing The Glass - Hunter 41895-01 Installation And Operation Manual

9 • Installing the Glass
Step 9-1
Flathead
umbscrew
12
Steps 9-3 – 9-4
Hunter Fan Company
9-1. Remove the flathead thumbscrew preassembled in the top edge of
the glass bowl. Set it aside for reuse in step 9-5.
9-2. Install three candelabra light bulbs (40 Watt maximum each).
9-3. To install the glass bowl, loosen the four thumbscrews on the
edge of the glass bowl. Raise the glass, inserting the thumbscrews
through the keyhole slots in the edge of the light fixture.
9-4. Rotate the glass bowl until the thumbscrews are firmly situated in
the light fixture. Tighten all four thumbscrews.
9-5. Insert the flathead thumbscrew (from Step 9-1) into the round
hole on the top of the light fixture. Tighten it to secure the glass
bowl.
9-6. Restore power to the fan.
umbscrew
Keyhole Slot
Flathead
umbscrew
Step 9-5
41895-01 • 10/14/05