Modifying A Phone Button Template For Personal Address Book Or Fast Dials - Cisco IP Phone Administration Manual

Modifying Phone Button Templates

Modifying a Phone Button Template for Personal Address Book or Fast Dials

You can modify a phone button template to associate a service URL with a line button. Doing so enables
users to have single-button access to the PAB and Fast Dials. Before you modify the phone button
template, you must configure PAB or Fast Dials as an IP Phone service.
To configure PAB or Fast Dial as an IP Phone service (if it is not already a service), follow these steps:
Procedure
Choose Device >Device Settings > Phone Services.
Step 1
The Find and List IP Phone Services window displays.
Click Add New.
Step 2
The IP Phone Services Configuration window displays.
Enter the following settings:
Step 3
•
•
•
•
•
•
•
Click Save.
Step 4
You can add, update, or delete service parameters as needed as described in
in the Cisco Unified Communications Manager Administration Guide.
To modify a phone button template for PAB or Fast Dial, follow these steps:
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
5-26
Service Name and ASCII Service Name—Enter Personal Address Book.
Service Description—Enter an optional description of the service.
Service URL
For PAB, enter the following URL:
http://<Unified CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=pab
For Fast Dial, enter the following URL:
http://<Unified-CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=fd
Secure Service URL
For PAB, enter the following URL:
https://<Unified CM-server-name>:8443/ccmpd/login.do?name=#DEVICENAME#&service=pab
For Fast Dial, enter the following URL:
https://<Unified-CM-server-name>:8443/ccmpd/login.do?name=#DEVICENAME#&service=fd
Service Category—Select XML Service.
Service Type—Select Directories.
Enable—Select the check box.
If you change the service URL, remove an IP Phone service parameter, or change the name
Note
of a phone service parameter for a phone service to which users are subscribed, you must
click Update Subscriptions to update all currently subscribed users with the changes, or
users must resubscribe to the service to rebuild the correct URL.
Chapter 5 Configuring Features, Templates, Services, and Users
IP Phone Service Parameters
OL-23091-01