Cisco IP Phone Administration Manual page 78

Network Configuration Menu
For information about the keys you can use to edit options, see
Table 4-2 Network Configuration Menu Options
Option
IPv4 Configuration
IPv6 Configuration
mac address
Host Name
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-6
Description
Internet Protocol v4 address menu.
In the IPv4 Configuration menu, you can do the
following:
Enable or disable the phone to use the IPv4 address
•
that is assigned by the DHCPv4 server.
• Manually set the IPv4 Address, Subnet Mask, Default
Routers, DNSv4 Server, and Alternate TFTP servers
for IPv4.
For more information on the IPv4 address fields, see the
specific field within this table.
Internet Protocol v6 address menu.
In the IPv6 Configuration menu, you can do the
following:
Enable or disable the phone to use the IPv6 address
•
that is assigned by the DHCPv6 server or to use the
IPv6 address that it acquires through Stateless
Address Autoconfiguration (SLAAC).
Manually set the IPv6 Address, Subnet Prefix Length,
•
DNSv6 Server, and IPv6 TFTP Servers.
For more information on the IPv6 address fields, see
Table 4-4.
For more information on SLAAC, see Deploying IPv6 in
Unified Communications Networks with Cisco Unified
Communications Manager.
Unique Media Access Control (MAC) address of the
phone.
Unique host name that the DHCP server assigned to the
phone.
Chapter 4 Configuring Settings on the Cisco Unified IP Phones
Editing Values, page
To Change
Unlock network configuration
1.
options.
Scroll to IPv4 Configuration and
2.
press the Select softkey.
1. Unlock network configuration
options.
2. Scroll to IPv6 Configuration and
press the Select softkey.
Display only—Cannot configure.
Display only—Cannot configure.
4-3.
OL-23091-01