Security Configuration Menu - Cisco IP Phone Administration Manual

Device Configuration Menu

Security Configuration Menu

The Security Configuration that you access directly from the Settings menu provides information about
various security settings. It also provides access to the Trust List menu. The Trust List menu indicates
if the CTL or ITL files are installed on the phone.
The phone also has a Security Configuration menu that you access directly from the Settings menu. For
Note
information about the security options on that menu, see
Table 4-17
Table 4-17 Security Configuration Menu Options
Option Description
PC Port Disabled Indicates whether the access port on the phone is
enabled (Yes) or disabled (No).
Must be set to enabled for video support on the
phone
GARP Enabled Indicates if the phone accepts MAC addresses
from Gratuitous ARP (GARP) responses.
Voice VLAN Indicates whether the phone allows a device
Enabled attached to the access port to access the Voice
VLAN. Setting this option to No (disabled)
prevents the attached PC from sending and
receiving data on the Voice VLAN.
Setting this option also prevents the PC from
receiving data sent and received by the phone. Set
this setting to Yes (enabled) if an application that
requires monitoring of the phone's traffic is
running on the PC. These applications include
monitoring and recording applications and
network monitoring software.
Web Access Indicates whether web access is enabled (Yes) or
Enabled disabled (No) for the phone.
Security Mode Displays the security mode that is set for the
phone.
Logging Display For use by the Cisco Technical Assistance Center (TAC), if necessary.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-32
describes the options on the Security Configuration menu.
Chapter 4 Configuring Settings on the Cisco Unified IP Phones
Security Configuration Menu, page
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
For more information, see
Web Page Access, page
Use Cisco Unified Communications Manager
Administration to modify.
4-39.
Disabling and Enabling
7-3.
OL-23091-01