Table of Contents
Advertisement
Configuration Menus on the Cisco Unified IP Phones
•
•
•
•
Displaying a Configuration Menu
To display a configuration menu, perform the following steps.
You can control whether a phone has access to the Settings menu or to options on this menu by using
Note
the Settings Access field in the Cisco Unified Communications Manager Administration Phone
Configuration window. The Settings Access field accepts these values:
•
•
•
If you cannot access an option on the Settings menu, check the Settings Access field.
Procedure
Step 1
Press the Settings button to access the Settings menu.
Perform one of these actions to display the desired menu:
Step 2
•
•
To display a submenu, repeat
Step 3
To exit a menu, press the Exit softkey.
Step 4
Related Topics
•
•
•
•
•
Unlocking and Locking Options
Configuration options that can be changed from a phone are locked by default to prevent users from
making changes that could affect the operation of a phone. You must unlock these options before you
can change them.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-2
Editing Values, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-18
Enabled—Allows access to the Settings menu.
Disabled—Prevents access to the Settings menu.
Restricted—Allows access to the User Preferences menu and allows volume changes to be saved.
Prevents access to other options on the Settings menu.
Use the Navigation button to select the desired menu and then press the Select softkey.
Use the keypad on the phone to enter the number that corresponds to the menu.
Unlocking and Locking Options, page 4-2
Editing Values, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-18
Chapter 4
Step
2.
Configuring Settings on the Cisco Unified IP Phones
OL-23091-01
Advertisement
Table of Contents
Troubleshooting
