Registration Roller - Oki OKIPAGE 14e Service Manual

3.3.13 Registration Roller

(1) Remove the upper cover (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.3).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the lower base unit (see 3.3.5).
(5) Remove the motor assy (see 3.3.10).
(6) With the lower base unit standing on its side, remove the one-way clutch gear 1 and the bearing
9.
(7) Remove the Registration Gear by unlocing latch of the Gear 4 .
(8) Remove the Registration Bearing(L) 3 .
(9) Press the registration roller Assy 2 in the direction of arrow
remove the registration roller Assy 2 .
(10) Pull out the registration roller Assy 2 in the direction of arrow
(11) Remove the pressure roller gear 5 by unlockin the lach of the gear 5 .
(12) Remove the bearing-Registration L 6 and besring-Registration R 7.
(13) Remove the spring 8 from the bearing 6 , 7 .
5
6
3
4
41605601TH Rev.2
2
8
2
and lift up the left side of it, then
A
.
B
8
7
B
B
A
1
9
View A
View A
58 /