Menu Property Sheet - Oki OKIPAGE 14e Service Manual

4.

Menu Property Sheet

The following figure provides an example of the Menu Property Sheet display.
(1) Set Item Display Tree View
Displays setting item names and a list of currently set values. An item with [N/A] in its set value
indicates that it is not supported. On that item, there has been no response when a set value
read command is sent.
(See the setting items list for setting items.)
Clicking on a setting item opens a set-value-selecting dialog.
(2) Configuration Dialog for Selecting Set Value
Displays this dialog on an item-by-item basis (the LED Head Marking No. combo boxes in the
example of the display).
Clicking on a set value makes the selection. The selected value takes effect only when another
set value is selected in the "Set Item Display Tree View." However, the set value is not
established in a device.
(3) Reset Engine Button
Sends an engine reset command to a device. After that, all set values are loaded again.
(4) Cancel Button
Disables all changes which have been made after the Property Sheet appears. However,
accessing the device side by use of the button is controlling.
(5) Entry Button
Records a currently displayed set value in a device. GUI set values in the engine menu group
affect a printer.
Selecting the "Entry" button sends all menu item set commands irrespective of whether change
is made to the all menu item GUI display (user-definable) information to be read.
(6) Upload Button
Reads a currently set value established in a device to display the value again.
41605601TH Rev.2
136 /