Pair Baby Unit - VTech BM3500 User Manual

Using your baby monitor

Pair baby unit

The baby units and parent unit provided are already paired.
You can add or replace baby units (BM3510, purchased
separately) to your baby monitor system.
You can pair a maximum of four baby units to your parent unit.
Each new baby unit must be paired to the parent unit before use.
Make sure you power on the baby unit and the parent
unit before pairing.
To pair a baby unit:
1. Press MENU/
2. Press or
/SELECT to select.
MENU
3. Press or
/SELECT to select.
MENU
4. Press or
/SELECT.
MENU
5. Make sure the new baby unit is turned on. On the new baby
unit, immediately press and hold PAIR when the parent unit
screen displays Press and hold PAIR on Baby Unit to
start Pairing. Parent unit screen displays Pairing...Please
Wait... and emits beep sound every two seconds. The LED
light on the new baby unit lashes quickly.
6. When pairing is successful, the screen displays Pairing
completed. You hear a conirmation tone. The LED light
on the new baby unit turns green. The parent unit returns to
the previous menu.
• If pairing fails, the screen displays Pairing failed. Try the pairing
process again.
• During registration, you may press
when parent unit screen displays Pairing... Please Wait....
• Only one baby unit can be paired at a time.
when the parent unit is not in use.
SELECT
to choose PAIR/UNPAIR, then press
to choose Pair Baby unit, then press
to choose a desired baby unit slot, then press
to cancel the registration
37