Getting started
Baby unit installation
You can power up the baby unit by connecting it to AC power.
Install the baby unit as shown below.
Bundle the power adapter cord neatly with a twist tie.The baby
unit turns on when it is powered up.
•
Use only the baby unit power adapters supplied with this
product. To order a replacement, contact VTech on
1 300 369 193.
•
The baby unit power adapters are intended to be correctly
oriented in a vertical or loor mount position. The prongs are
not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
•
Make sure the baby units and the power adapter cords are
out of reach of children.reach of children.
Power outlet
2
Bundle the
power cord
1
2