Parent Unit Display Messages - VTech BM3500 User Manual

Getting started

Parent unit display messages

Battery low
Failed to connect
No Link
Pairing failed
Conirm to unpair?
Pairing completed
Unpairing completed
Please Wait...
Temperature too low
Temperature too high
When the parent unit is powered by the
rechargeable battery and the battery level
is low, it needs to be recharged.
The parent unit fails to switch to the next
baby unit in Single Baby unit or Patrol
Mode.
The selected baby unit slot is not linked to
the parent unit.
The selected baby unit cannot be paired
with the parent unit.
You try to unpair the baby unit(s). The
operation needs your conirmation.
The selected baby unit has been paired
with the parent unit.
The selected baby unit(s) has been
unpaired with the parent unit.
The link between the parent unit and the
selected baby unit is lost, or the selected
baby unit is out of range, or the selected
baby unit slot is empty.
When you have only one paired baby unit
and the link is lost, or you have multiple
paired baby units and the links are lost.
The temperature detected from the
selected baby unit is below the set
minimum temperature.
The temperature detected from the
selected baby unit is above the set
maximum temperature.
20