Getting started
Test your baby monitor before use
You may test the baby monitor before initial use, and at
regular times thereafter.
To test your baby monitor:
1.
Place the parent unit and the baby unit in the same room to
test the product.
2.
Press and hold
Please Wait....
3.
Slide ON/OFF on the baby unit to turn it on.
4.
If the parent unit displays an image from the baby unit. Your
baby monitor is now ready for use.
•
Make sure the baby unit is at least 1 metre away from the
parent unit.
•
If both units are not connected, the parent unit displays
No Link for a few seconds. Then it displays Please Wait...
and
on the parent unit the screen displays
lashes.
22