Table of Contents
Advertisement
4.12
pair/unpair Baby Unit
4.12.1
pair New Baby Unit
The baby units and parent unit provided are already paired.
You can add or replace baby units (purchased separately) to
your baby monitor system.
You can pair a maximum of four baby units to your parent
unit. Each new baby unit must be paired to the parent unit before use.
Make sure you power on the baby unit (see page 37) and the parent unit
(see page 38) before pairing.
To pair a baby unit:
1.
Press
when the parent unit is not in use.
2.
Press
or
3.
Press
or
4.
Press
or
.
5.
Make sure the new baby unit is turned on. On the new baby unit,
immediately press and hold pAIr for five seconds when the parent
unit screen displays press and hold pAIr on Baby Unit to start
pairing. Parent unit screen displays pairing...please Wait... and
emits beep sound every two seconds. The LED light on the new
baby unit flashes quickly.
6.
When pairing is successful, the screen displays pairing completed.
You hear a confirmation tone. The LED light on the new baby unit
turns green. The parent unit returns to the previous menu.
Notes
•
If pairing fails, the screen displays pairing failed. Try the pairing process again.
•
During registration, you may press
screen displays pairing... please Wait....
•
Only one baby unit can be paired at a time.
to choose pAIr/UNpAIr, then press
to choose pair Baby Unit, then press
to choose a desired baby unit slot, then press
to cancel the registration when parent unit
35
.
.
Hide quick links:
Advertisement
Table of Contents
