Positioning The Baby Monitor; Operating Range; Audio Settings - VTech BM3500 User Manual

Getting started

Positioning the baby monitor

Place the parent unit within the operating range (see below)
of the baby unit. We recommend you place the parent unit
at least 1 metre away from the baby unit to avoid audio
feedback. If you still experience audio feedback, move the
parent unit and the baby unit farther apart.
For better image quality, do not place the baby unit too far
away from your baby.

Operating range

The operating range of the baby monitor is up to 300
metres outdoors or 50 metres indoors. The actual operating
range may vary depending on the environmental conditions
and other interferences such as walls, doors and other
obstructions.

Audio settings

The baby unit may not detect sounds when the sensitivity
level is set below a certain level. You may need to increase
the sensitivity level (see page 33).
You may need to turn the speaker volume louder on the
parent unit to hear the sounds transmitted from the baby unit
(see page 23).
It is the caregiver's responsibility to stay close enough to
take care of any eventuality.
21