Baby Unit Installation Options - VTech BM3500 User Manual

Getting started

Baby unit installation options

The baby unit is ready for tabletop use. Use the provided wall mount if
you want to mount it on a wall. Make sure to test the reception and the
baby unit position before completing the wall mounting installation
(see Test your baby monitor before use on page 22).
Tabletop to wall mount installation
Option 1: Use this method to ix the wall mount securely on
the wall.
Check for reception strength and camera angle before drilling
the holes.
1. Place the wall mount on a wall, and then use a
pencil to mark the top two holes as shown. Remove the
wall mount and drill two holes in the wall (7/32" drill bit).
2. If you drill the holes into a stud, go to step 3.
-OR-
If you drill the holes into an object other than a stud, insert
the wall anchors into the holes. Tap gently on the ends with
a hammer until the wall anchors are lush with the wall.
3