Parent Unit Display Messages - VTech BM3500 User Manual

3.6

parent Unit Display Messages

Battery low
Failed to connect
No Link
pairing failed
Confirm to unpair?
pairing completed
Unpairing completed
please Wait...
Temperature too low
Temperature too high
When the parent unit is powered by the
rechargeable battery and the battery level is
low, it needs to be recharged.
The parent unit fails to switch to the next baby
unit in Single Baby Unit or Patrol Mode.
The selected baby unit slot is not linked to
the parent unit.
The selected baby unit cannot be paired with
the parent unit.
You try to unpair the baby unit(s). The
operation needs your confirmation.
The selected baby unit has been paired with
the parent unit.
The selected baby unit(s) has been unpaired
with the parent unit.
The link between the parent unit and the
selected baby unit is lost, or the selected
baby unit is out of range, or the selected
baby unit slot is empty.
The temperature detected from the selected
baby unit is below the set minimum
temperature.
The temperature detected from the selected
baby unit is above the set maximum
temperature.
23