D. Install the Optional hEAT-ZONE-GAS Kit
NOTE: There must be NO INSULATION or other
combustibles inside the framed firestop opening.
HEAT-ZONE-GAS
ATTACHES HERE
Figure 7.10
1. Remove the knockout from the fireplace and discard
it. See Figure 7.10.
2. Center the duct collar around the exposed hole and
attach it to the fireplace with 3 screws. NOTE: Do this
BEFORE final positioning of the fireplace.
. Determine the location for the air register/fan housing
assembly.
Reference the Heat-Zone kit instructions for the
remaining installation steps.
26
Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R • 2101-900 Rev. H • 4/07