Assembly Instructions - BBQ GSF3016HN Owner's Manual

Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if
necessary.
Estimated assembly time: 35 minutes.
Step 2 (Casters Assembly)
a) Screw one caster (T) into each pre-drilled hole on
the foot of cart side panel until secure.
b) Go back and tighten all casters by the wrench
provided.
GSF3016HN
Owner's Manual

Assembly Instructions

Step 1 (Cart Assembly)
a) Align the holes on the left end of cart bottom panel
(Q) with the holes on the left cart side panel (R),
then insert one bolt (II) with one spring washer
(CC) and one flat washer (DD) into each pre-drilled
holes. Tighten bolts by hand until secured. Repeat
the procedure on the right end.
b) Align the holes on the right end of upper cart front
beam (O) with the holes on right cart side panel (S),
then insert one bolt (II) with one spring washer
(CC) and one flat washer (DD) into each pre-drilled
holes. Tighten bolts by hand until secured. Repeat
the procedure on the left end.
c) Repeat the procedure for the upper cart back beam
(N) assembly.
d) Go back and tighten all the bolts using the
screwdriver provided.
7