Grizzly G0704 Owner's Manual page 38

G9512—T-Slot Nuts, 4 pK,
heat treated steel t-slot nuts with black oxide
finish feature an imperfect thread in the base of
the t-nut to eliminate any danger of screwing the
clamping stud through and damaging the table
slot.
figure 42. model g9512 t-slot nuts.
G5758—Tilt Table 5" x 7"
set your work at any angle with these sturdy tilt
tables. heavy-duty construction includes t-slots,
two locking screws and precision base that allows
the table to tilt from -45 degrees to +45 degrees.
table size: 5" x 7".
figure 43. model g5758 tilt table.
Model G0704 (Mfg. Since 08/11)
" Slot,
/ / "-16
1 3
2 8
G9849—Magnetic base/Dial Indicator combo
precision measurements and setups have never
been so easy. magnetic base engages with just
the turn of a switch and allows pinpoint adjust-
ment. the dial indicator features 0-1" travel and
has a resolution of 0.001". this fine set includes a
molded case for protection and convenience.
figure 44. model g9849 indicator/base Combo
-35-