C
H A P T E R
This chapter provides an example of using the web configurator to set up and use the Switch.
6.1 How to Use DHCP Relay on the Switch
This tutorial describes how to configure your Switch to forward DHCP client requests to a
specific DHCP server. The DHCP server can then assign a specific IP address based on the
information in the DHCP requests.
6.1.1 DHCP Relay Tutorial Introduction
In this example, you have configured your DHCP server (192.168.2.3) and want to have it
assign a specific IP address (say 172.16.1.18) to DHCP client A based on the system name,
VLAN ID and port number in the DHCP request. Client A connects to the Switch's port 2 in
VLAN 102.
Figure 24 Tutorial: DHCP Relay Scenario
6.1.2 Creating a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
ES-2024 Series User's Guide
6
Tutorials
61