Link Aggregation Setting; Figure 67 Advanced Application > Link Aggregation > Link Aggregation Setting; Table 36 Advanced Application > Link Aggregation > Link Aggregation Setting - ZyXEL Communications ES-2024 Series User Manual

Table 35 Advanced Application > Link Aggregation Status (continued)
LABEL
Aggregator ID
Status

17.4 Link Aggregation Setting

Click Advanced Application > Link Aggregation > Link Aggregation Setting to display
the screen shown next. See
aggregation.
Figure 67 Advanced Application > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 36 Advanced Application > Link Aggregation > Link Aggregation Setting
LABEL
Link
Aggregation
Setting
Group ID
Active
ES-2024 Series User's Guide
DESCRIPTION
Link Aggregator ID consists of the following: system priority, MAC address, key, port
priority and port number. Refer to
this field.
This field displays how these ports were added to the trunk group. It displays:
• Static - if the ports are configured as static members of a trunk group.
• LACP - if the ports are configured to join a trunk group via LACP.
Section 17.1 on page 127
DESCRIPTION
This is the only screen you need to configure to enable static link aggregation.
The field identifies the link aggregation group, that is, one logical link containing
multiple ports.
Select this option to activate a trunk group.
Chapter 17 Link Aggregation
Section 17.2.1 on page 128
for more information on link
for more information on
129