What's In The Box Part 1-2-3 - Axminster 200387 User Manual

What's in the Box Part 1...
W
A X M I N S T E R
W H I T E
Model Number:
Box 1
1 No.
2 No.
4 No.
Packed inside the saw chassis:
1 No.
4 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
2 No.
1 No.
1 No.
2 No.
2 No.
For assembling main Dust Extraction Hose and Top Guard Hose
1 No. Packet containing :-
2 No.
2 No.
04
Saw Body:
Saw Table on upper chassis (with motor, table insert, saw blade, NVR switch fitted)
Extension Table Leaves
Panels to fabricate the lower base ( 2 long 2 short. ( I off short panel has hole
cut out to fit dust extraction duct.)
Adjustable Support Leg (for table extensions) with fixing bolts, nuts and washers
Legs
Riving Knife
Length of 100mm expanding hose
100mm extraction duct with integral 30mm manifold and fixing nuts bolts and
washers
Top Saw Guard
Combined length of 30mm hose
Kwick hold down clamp and Tool Post
Mitre Fence on bar. ('T' function action by screwed on washers)
Packet containing: -- Tommy bar and Stamped Spanner (for blade changing)
Switch Shroud with securing screws.
Engineers Hand Wheels.
Length Gauge Stop for slide table fence.
Mitre Angle Rear Quadrant for slide table fence (with 2 No. M8 x 20mm caphead
bolts) and clamping handle fitted.
Height Adjusting Blocks (for slide rail mounting brackets)
Rear Extension Table Brackets.
125mm Jubilee Clips
40mm Jubilee Clips
www.axminster.co.uk
MJ2325A / MJ2325B