7.2.2 Use DVR FTP Upgrade Function
Use "FTP" function of "Upgrade" sub menu in "Utilities" menu. You need one host PC
to run FTP server software and place firmware file (digicap), and make sure DVR and PC
are in the same sub net, input FTP server IP and press [ENTER].
Upgrading as following:
7.2.3 Use RS-232 Serial Command
Connect DVR RS-232 port and PC com port, run Hyper Terminal.
Step 1: Setup and run HyperTerminal
The parameters are: Baud rate: 115200bps, Data bit: 8 bits, Stop bit: 1 bit,
Parity: No, Flow ctrl: None.
117