Jaycar Electronics DS-8704HI-S User Manual page 91

parameters of current alarm input to other external input.
Step 10: Save setup In "Alarms" menu, press "Confirm" button to save the
parameters. Press "Cancel" button or [ESC] key to abort.
Alarm relay output setup
Step 1: In "Alarms" menu, use [↑] [↓] keys to select one alarm output.
Step 2: Select delay time
The delay time is when the alarm is disappeared, the alarm output will continue
output time. The delay time options are: 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute, 2
Minutes, 5 Minutes, 10 Minutes and Manual Stop. If you select "Manual' option, the alarm
output will not stop until you press "Clear Alarm" button in "Utilities" menu. So the actual
alarm output time is made up of alarm input time and this delay time.
Step 3: Enter into alarm out schedule
You can set the schedule to make alarm output into effective. Move "Active Frame" to
"Schedule" button on right side of "Alarm Out Time" item, press[ENTER] key to enter into
the corresponding schedule menu:
Step 4: Setup alarm out schedule
Like other schedule setup, you can set 4 time periods for one day and 7 days for one
week. When you finish setup, press "Confirm" button to return "Alarms" menu.
Step 5: Copy one alarm output parameters to other alarm output
91