Step 5: Setup alarm schedule: You can setup working schedule. Only when the
video loss is happened in the schedule, DVR will response.
Note: The 4 time periods can not overlap. Please reboot DVR to make parameters
into effective.
Step 6: Setup alarm policy: You can select one or more solution including "On
Screen Warning", "Audible Warning", "send Email", "Upload to Center" and "Trigger Alarm
Output". You can use [] [] and [EDIT] key to enable or disable them. Blank means
disable and "" is enable.
Step 7: Save alarm setup: After your setup, press "Confirm" button and return
"Image Setup" interface. In "Image Setup" menu, press "Confirm" button to save current
camera parameters and return main menu.
Step 8: Save all cameras: If you want to setup other cameras, please repeat from
step2 to step 6. In "Image Setup" menu, press "Confirm" key to save all cameras
parameters. Press "Cancel" button or [ESC] key to abort.
75