Jaycar Electronics DS-8704HI-S User Manual page 13

3：Connect the motherboard and hard disk by data cable.
4：Connect the power cable to hard disk.
5：Mount back the metal cover, and fixed by screws.
6: Press [MENU] key to enter into DVR main menu. Go to the "Utilities" menu and
choose "Hard disk" to format the hard disks, Check if all installed disks are detected by
the DVR, and if the capacity is OK. Choose "Format" and select "All" to format all hard
disks. When all disks are formatted a confirmation message will be shown on the
screen. Check if all installed disks have the status "OK".
13