Jaycar Electronics DS-8704HI-S User Manual page 89

Step 4: Alarm trigger record channel setup
You can select channels to record for each alarm input. In the sub menu, you can use
[ENTER] or [EDIT] key to enable record channel. "" means enable.
Note: In order to trigger the channel to record, in "Recording" menu, you must enable
recording and select record type as "Alarm" or other related type. Please refer to chapter
5.11.
Step 5: Schedule for alarm handle method
When there is external alarm happened in the schedule, DVR will response according
to the handle methods.
Step 6: Alarm handle method
You can select one or more handle method: "On Screen Warning", "Audible Warning",
"send Email", "Upload to Center" and "Trigger Alarm Output".
Description: If "On Screen Warning" is enabled, when there is external alarm
happened and DVR is in preview mode, DVR will pop-up the related camera. If you trigger
more than one camera, DVR will pop-up them one by N seconds (The value of N
dependent on the switch time in preview setup). When the external alarm is disappeared,
DVR will restore preview mode.
Step 7: Save setup
In "Alarm in Handling" sub menu, press "Confirm" button and return "Alarms" menu. In
89