5.15 RS232 Setup
There is one RS-232 port at DVR rear panel. In main menu, move "Active Frame" to
"Utilities" to enter into DVR "Utilities" menu. In DVR "Utilities" menu, press RS232 setup:
RS232 menu description
RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
Work mode: The RS-232 can be used as "Console" or "Transparent Channel".
5.15.1
Console Mode
Connect with PC serial port. You can use HyperTerminal to control it.
5.15.2
Transparent Channel Mode
Connect serial devices. Remote PC can control these serial devices through network.
5.16 Exceptions Setup
The exceptions can be handled at present include: hard disk full, hard disk error,
104