Jaycar Electronics DS-8704HI-S User Manual page 78


[←]: Left shrink red pane;

[↓]: Down enlarge red pane;

[↑]: Up shrink red pane;

[PTZ]: Set whole screen as motion area;

[A]: Clear all motion areas;
 [ENTER]: Save and return "Image Setup" menu;
 [ESC]: Cancel setup and return "Image Setup" menu;
Step 5: Motion alarm policy: Move "Active Frame" to the corresponding "Policy"
button of motion detection alarm, press [ENTER] key to enter into "Motion Alarm Handle"
menu:
Step 6: Motion alarm record channel setup: When there is motion alarm happened,
you can trigger related camera to start recording. In "Motion Alarm Handle" menu, you can
select one or more record channels. Please use [ENTER] or [EDIT] key to enable the flag
into "".
Note: In order to make the cameras start recording, in "Recording" menu, you must
enable recording schedule and set "Rec Type" as "Motion Detection" or "Motion | Alarm".
Please refer to chapter 5.11 for recording setup.
Step 7: Motion alarm schedule: When the motion alarm is happened in schedule,
DVR will response such as "On Screen Warning", "Audible Warning", "Upload to Center"
and "Trigger Alarm Output". You can setup 4 time periods for one day and 7 days for one
78