Handling Guidelines - Pioneer DEH-X9550BT Owner's Manual

Additional information
Message Cause Action
ERROR-19 Communication Perform one of
failed. the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect or
eject the external
storage device.
–Change to a dif-
ferent source.
Then, return to
the USB or SD
source.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
ERROR-23 USB storage de- USB storage de-
vice was not for- vice should be for-
matted with matted with
FAT12, FAT16 or FAT12, FAT16 or
FAT32. FAT32.
ERROR-16
The iPod firm- Update the iPod
ware version is version.
old.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
Message Cause Action
STOP There are no Select a list that
songs in the contains songs.
current list.
Not found
No related Transfer songs to
songs. the iPod.
Bluetooth device
Message Cause Action
ERROR-10 The power failed Turn the ignition
for the switch OFF and
Bluetooth mod- then to ACC or
ule of this unit. ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.
Apps
Message Cause Action
No BT de-
No Bluetooth Follow the in-
vice.Go to BT device found. structions that ap-
MENU to pear on the
register. screen.
BT error. Bluetooth con- Follow the in-
Press BAND nection failed. structions that ap-
key to retry. pear on the
screen.
Check your Connection to Follow the in-
App.Press
the application structions that ap-
BAND key to
failed. pear on the
retry. screen.
Additional information
Message Cause Action
Start up and The application Follow the in-
play your has not started structions that ap-
Application. running yet. pear on the
screen.

Handling guidelines

Discs and player
Use only discs that feature either of the following
two logos.
Use 12-cm discs. Do not use 8-cm discs or an
adapter for 8-cm discs.
Use only conventional, fully circular discs. Do not
use shaped discs.
Do not insert anything other than a CD into the
disc loading slot.
Do not use cracked, chipped, warped, or other-
wise damaged discs as they may damage the play-
er.
Unfinalized CD-R/RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals
to the surface of the discs.
To clean a CD, wipe the disc with a soft cloth out-
ward from the center.
Condensation may temporarily impair the player's
performance. Let it rest for about one hour to ad-
just to a warmer temperature. Also, wipe any
damp discs off with a soft cloth.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded applica-
tion, playback environment, storage conditions,
and so on.
Road shocks may interrupt disc playback.
Read the precautions for discs before using them.
When using discs that can be printed on label sur-
faces, check the instructions and the warnings of
the discs. Depending on the discs, inserting and
ejecting may not be possible. Using such discs
may result in damage to this equipment.
Do not attach commercially available labels or
other materials to the discs.
! The discs may warp making the disc unplay-
able.
! The labels may come off during playback and
prevent ejection of the discs, which may result
in damage to the equipment.
External storage device (USB, SD)
Address any questions you have about your exter-
nal storage device (USB, SD) to the manufacturer
of the device.
Do not leave the external storage device (USB, SD)
in places with high temperatures.
Depending on the external storage device (USB,
SD), the following problems may occur.
! Operations may vary.
! The storage device may not be recognized.
! Files may not be played back properly.
Appendix
23
En