This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007. Detach button BAND/ /DIMMER Remote Control If you experience problems Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service VOLUME +/– Station. MUTE AUDIO FUNCTION...
Indication Description Frequently used operations Appears when the iPod control function is set (page 8). Operation Purpose Head Unit Remote Control Detaching the front panel Turn on the power* Press SRC/OFF to turn on Press SRC to turn on the the power.
WARNING NOTES • You can cancel the menu setting by pressing SRC/OFF. • Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor • These settings can be made at any time from the SYSTEM settings (page 10) and INITIAL settings immediately.
PTY list Best stations memory (BSM) For more details about PTY list, visit the following site: http://www.pioneer.eu/eur/products/25/121/tech/CarAudio/PTY.html The six strongest stations are stored on the number buttons (1/ to 6/ After selecting the band, press the M.C. dial to display the main menu.
CAUTION the alphabetical search mode.) Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected 3 Turn the M.C. dial to select a letter, then directly to the unit will protrude out from the unit, which could be dangerous.
NOTE the buttons on the unit or supplied remote control. In this mode, the connected iPod PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION cannot be turned on or off. THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE...
Playback of an application via the unit Menu Item Description REGIONAL Connect this unit with the mobile device. [ON], [OFF] Limit the reception to the specific regional • iPhone via USB (page 7) programs when AF (alternative frequencies search) is selected. (Available only when FM Press SRC/OFF to select [APP].
Set to [ON] when using an auxiliary device [160HZ], [200HZ] connected to the unit. Output level: [–24] to [+6] Slope level: [–12], [–24] S.REMOTE* BASS BOOST [OFF], [PIONEER], [PRESET] Select [PIONEER] or [PRESET] according to your wired remote control. [0] to [+6] Select the bass boost level.
* Depending on your car, this function may not work properly. In this case, contact your dealer or an MIXTRAX settings authorized PIONEER Service Station. Menu Item Description ILLUMINATION settings SHORT PLAYBCK/SHORT MODE Menu Item Description [1.0 MIN], [1.5 MIN], [2.0 MIN], Select the length of the playback time.
vehicle is equipped with a glass antenna, Perform these connections when using a Connections/Installation connect it to the antenna booster power subwoofer without the optional amplifier. supply terminal. • Never connect the blue/white cable to Connections the power terminal of an external power amp.
Page 13
When using a subwoofer of 70 W (2 Ω), • Consult your dealer if installation requires Secure the mounting sleeve by using a Removing the unit be sure to connect the subwoofer to the drilling of holes or other modifications to screwdriver to bend the metal tabs Remove the trim ring.
ON again. If the message remains, → The connected USB device consumes protected files. contact your dealer or an authorized NOT FOUND more than maximum allowable current. – The protected files are skipped. Pioneer Service Station for assistance. → No related songs.
CAUTION Quantization bits 8 and 16 (LPCM), 4 • Firmly secure the USB storage device • Pioneer cannot guarantee compatibility (MSADPCM) before driving. Do not let the USB storage with all USB mass storage devices, and device fall onto the floor, where it may...
Usable discs: Compact disc supported. MIXTRAX Signal-to-noise ratio: 94 dB (1 kHz) (IEC-A Made for MIXTRAX is a trademark of the PIONEER network) – iPod touch (1st through 5th generation) CORPORATION. Number of channels: 2 (stereo) – iPod classic MP3 decoding format: MPEG-1 &...
Page 17
FM tuner Frequency range: 87.5 MHz to 108.0 MHz Usable sensitivity: 11 dBf (1.0 μV/75 Ω, mono, S/N: 30 dB) Signal-to-noise ratio: 72 dB (IEC-A network) MW tuner Frequency range: 531 kHz to 1 602 kHz (9 kHz) 530 kHz to 1 640 kHz (10 kHz) Usable sensitivity: 25 μV (S/N: 20 dB) Signal-to-noise ratio: 62 dB (IEC-A network) SW tuner...