Table of Contents
Advertisement
System Setting
Auto skew correction
retain
Machine ID Printing
(High-speed Video Laser
Printer only)
Cycle print mode
(PR mode only)
Paper size of Paper
Feeding Tray
(High-speed Video Laser
Printer only)
Contrast setting
The print function at the
time of Toner Empty
detection (PR mode only)
Auto Film Format Select
Print function
(PR mode only)
90 degree rotation setting
Automatic paper source
switching (High-Speed
Video Laser Printer only)
B-2
Selection
Default
Retained
Not
Not
Retained
Retained
Disabled
Disabled
Pattern 1
Pattern 2
Enabled
Disabled
Disabled
Lengthwis
Crosswis
e
e
Crosswise
Lighter
Normal
Normal
Darker
Disable
Disable
Print
Print
Enable
Print
Enabled
Enabled
Disabled
Enabled
Disabled
Disabled
Auto
Auto
switching
switching
Disabling
Auto
switching
Description
Determines whether or not to retain the original
(uncorrected skew of a screen image after the print has
been made).
When two scanners are connected to one printer, this
function leaves an identification marker on the print so
the scanner used for the job can be determined after
printing.
Pattern 1
Paper
This function automatically scans the next image
following a preset period of time (the period can be set by
your Kodak Service Representative). Images are set by
the user onto the Carrier Glass between cycles.
Determines the desired paper size from the Paper
Feeding Tray of the printer.
To view subtle images with standard ranges of density
clearly: Light (-1 to -7). To bring out the darker and lighter
ranges of an image: Dark (+1 to +7).
After a toner empty condition is detected, this function
allows you to select either to stop printing or continue
printing.
The Auto Film Format Select Print function is enabled or
disabled through the control panel. This function is used
for managing horizontal and vertical printing when letter-
or A4-sized paper is set crosswise/lengthwise into the
paper feeding tray/paper feeding cassette.
Enables the prism to rotate the screen image 90 degrees.
Allows you to specify the paper source when letter- or
A4-sized paper is loaded in lengthwise or crosswise
orientations into the paper feeding tray and paper feeding
cassette.
Auto switching: printing continues by automatically
switching to the reaming paper source after paper in the
specified paper source runs out.
Disabling Auto switching: a paper empty mode occurs
and printing stops after paper in the specified paper
source runs out. The paper source must be refilled or the
paper source must be switched by pressing the Output
Selection key to resume printing.
Pattern 2
Paper
A-61316 September 2004
Hide quick links:
Advertisement
Table of Contents
