Using Cycle Print Mode - Kodak 2400DSV-E Operator's Manual

Using Cycle Print mode

A-61316 September 2004
The Cycle Print mode will operate until it is cancelled. After the first
scanning operation has finished, the system automatically scans the next
image following a preset period of time.
1. After entering the Cycle Print mode, press Start.
2. To pause an operation during the Cycle Print mode press Clear. The
No. of Copies value will change from a blinking display to a constant
display.
3. While the pause function is enabled, you can exit the Cycle Print
mode by pressing Clear a second time (the value displayed in the No
of Copies display changes to 1.
NOTES:
•
The Cycle Print mode continues to operate until it is cancelled. After
the first scanning operation has finished, the system automatically
scans the next image following a preset period of time.
•
The No. of Copies value flashes during the scanning and waiting
operations.
•
The next scanning job can be started manually by pressing Start
before the system automatically initiates the same job.
Start
3-17