Recalling Job Programs; Using Electrical Zoom; Clearing The Zoom Magnification - Kodak 2400DSV-E Operator's Manual

Recalling Job Programs

Using Electrical Zoom

Clearing the Zoom
magnification
Paper Size
Standard magnification
3-20
To recall a registered Job Program:
1. Press the Shift and Job Recall keys at the same time.
NOTE: Each time the Job Recall key is pressed while holding down the
Shift key, the display rotates through 1J, 2J, 3J.
Shift
2. When the desired setting is displayed, release the keys.
In addition to using the lens to zoom, the electrical zoom function has
been provided for magnifying the image when it is printed.
Zoom +: When the Zoom+ key is pressed with the Shift key, the
magnification is increased by an increment of 0.01X (up to 2.00X).
Zoom –: When the Zoom- key is pressed with the Shift key, the
magnification is decreased by a decrement of 0.01X (down to 0.50X).
NOTE: The Zoom magnification is displayed in the Multi-Print display to
two decimal places. For example, when the magnification is
0.50X, it is displayed as 50. When the magnification is 1.50X, it is
displayed as 50 also.
The Zoom magnification level is also displayed in the Exposure
Display.
You can clear the current zoom setting by holding the Zoom Clr key and
the Shift key down together for more than one second.
The standard magnification is fixed according to the selected paper size.
A3 B4
1.41x 1.22x
NOTE: When the Zoom magnification is changed, it is displayed in the
Multi-Print display as follows:
When standard magnification is resumed, this display goes off.
When the Zoom function is used, the Multi-Print can only be set
to 9.
Job Recall
A4 B5 Ledger
1.00x 1.00x 1.55x
Legal Letter 11 x 17"
1.27x 1.00x 1.41x
A-61316 September 2004