Url Blocking - Planet WNRT-620 User Manual

After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
5.7.2

URL Blocking

You can block users to access to some web sites by entering a full URL address or just keyword of the
web site.
Parameters Description
Enable URL Blocking Enable/disable URL Blocking.
Fill in "URL / Keyword" and then click "Add". You can enter the full URL
address or the keyword of the web site you want to block. If you find any typo
Add URL / Keyword
before adding it and want to retype again, just click "Reset" and the field will
be cleared.
If you want to remove some URL keyword from the "Current URL Blocking
Table", select the URL keyword you want to remove in the table and then
Remove URL / Keyword click "Delete Selected". If you want remove all URL keyword from the table,
just click "Delete All" button. If you want to clear the selection and re-select
again, just click "Reset".
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
- 55 -