Wds Mode - Planet WNRT-620 User Manual

Channel 1-11 (North America)
If you want to bridge multiple WNRT-620 in this mode, you have to enter the MAC
MAC Address 1-4
addresses of other WNRT-620 into the fields.
IF you want to enable security to protect your wireless connection. Please press
Set Security "Set Security" button and refer to section 6.5 "Security setting for bridge mode" to
configure the detail settings.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.

WDS Mode

If you want WNRT-620 to bridge to other WNRT-620 and provide access for other wireless
clients at the same time, you have to set the WNRT-620 to "AP Bridge - WDS". Simply speaking,
"AP Bridge - WDS" function is the combination of "AP mode" and "AP Bridge-Point to Multi-Point
mode".
Parameter Description
Shows the current operation mode. You may set WNRT-620 to other operating
Mode
mode by select other operating mode.
2.4GHz (B): It forces the WNRT-620 to operate in 802.11b only. (maximum transfer
rate 11Mbps)
Band
2.4GHz (G): It forces the WNRT-620 to operate in 802.11g only. (maximum transfer
rate 54Mbps)
- 63 -