Table of Contents
Advertisement
single legal IP Address. NAT provides Firewall protection from hacker attacks and has the flexibility to
allow you to map Private IP Addresses to Public IP Addresses for key services such as Websites and
FTP. If NAT is disabled, all LAN side workstations must have legal IP addresses for Internet access. If
the router is used for routing application, not
Parameters
Description
You can select to enable or disable the NAT function. If you choose the
disable, the NAT sub-function will just let you to use the function of Static
Enable or Disable NAT
Routing setting as well as the fast NAT mode also cannot be used even it is
module function
in the status of enable. After selected, please click "Apply" to make the
settings effect.
Enable or Disable fast
It must be worked under enable NAT module. It can improve the speed
NAT module function
during translate a data.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
for Internet
access, the NAT function can be disabled.
- 43 -
Advertisement
Table of Contents
