Ap Bridge Point To Point Mode - Planet WNRT-625 User Manual

6.3

AP Bridge Point to Point Mode

This function allows WNRT-625 to bridge 2 wired Ethernet networks wirelessly.
Parameter Description
Shows the current operation mode. You may set WNRT-625 to other operating
Mode
mode by select other operating mode.
2.4GHz (B): It forces the WNRT-625 to operate in 802.11b only.
2.4GHz (G): It forces the WNRT-625 to operate in 802.11g only.
2.4GHz (N): It forces the WNRT-625 to operate in 802.11n only.
Band 2.4GHz (B+G): It allows the WNRT-625 to operate in 802.11b and 802.11g
simultaneously.
2.4GHz (B+G+N): It allows the WNRT-625 to operate in 802.11b, 802.11g, and
802.11n simultaneously.
Select the appropriate channel from the list provided to correspond with your
Channel Number
network settings. Channels differ from country to country.
MAC Address 1 Please enter the MAC Address of another WNRT-625 that this one will connect.
IF you want to enable security to protect your wireless connection. Please press
Set Security "Set Security" button and refer to section 6.7 "Security setting for bridge mode" to
configure the detail settings.
After configuration complete, please click "Apply" button to save the configuration. Then you will
see a screen to prompt you the settings are saving successfully. You may press "Continue" for
configure other settings or "Apply" to restart WNRT-625 with new configuration. Please refer to
section 4.2.7 for more information about this screen.
- 64 -