Planet WNRT-625 User Manual page 47

(required by some real-time and interactive traffic), and improved loss characteristics. When using this
feature, it is important to make sure the rules are not conflicted with each other.
Parameters Description
Check this box to enable QoS function, unselect this box if you don't want to
Enable QoS
enforce QoS bandwidth limitations.
You can set the limit of total download bandwidth in kbits. To disable
Total Download Bandwidth
download bandwidth limitation.
You can set the limit of total upload bandwidth in kbits. To disable upload
Total Upload Bandwidth
bandwidth limitation.
When you want to add a new QoS rule, press this button and refer to
Add
instructions below to add a new QoS rule.
When you want to edit the existing QoS rule, press this button and refer to
Edit
instructions below to edit QoS rule.
Select the QoS rule which you would like to delete, press this button to
Delete Selected
delete.
When you want to delete all the QoS rules, you just need to press this
Delete All
button.
Move Up Select a QoS rule and press this button to assign higher priority.
Remove Down Select a QoS rule and press this button to assign lower priority.
Reset Click "Reset" to clear your current selections.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-625 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
- 42 -