Thank you for purchasing WNRT-625. This manual guides you on how to install and properly use the
WNRT-625 in order to take full advantage of its features.
1.1
Package Contents
Make sure that you have the following items:
•
One WNRT-625
•
One Power Adapter
•
One CD Disk
•
One Quick Installation Guide
•
One Ethernet Cable
Note:
If any of the above items are missing, please contact your supplier for support.
1.2
Features
Compliant with IEEE 802.11n (Draft 2.0) wireless technology
Provides up to 150Mbps transmit and 300Mbps receive data rate
Support Wi-Fi Protected Setup (WPS)
Backward compatible with 802.11g / 802.11b standard
Farther coverage, less dead spaces and higher throughput with 802.11n technology
Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x) functions
for high level of security
AP/Station-Infrastructure/Bridge/WDS/Repeater modes supported
IP/Protocol based QoS
Equipped with four LAN ports (10/100M) and one WAN port (10/100M), Auto-MDI/MDI-X support
Supports DHCP Server
Easy to use Web-based GUI for configuration and management purposes
Remotes Management allows configuration and upgrades from a remote site
Dynamic/Static/PPPoE/PPTP/L2TP/Telstra Big Pond IP allocation
MAC/IP filter access control, URL blocking
SPI firewall + DoS prevention protection
Supports UPnP function
1.3
Specification
Standard
IEEE 802.11b/g, 802.11n Draft 2.0
11b mode: DSSS
Signal Type
11g mode: OFDM
Chapter 1 Introduction
- 1 -