Daytime Running; Lamps (Drl) - Chevrolet 2010 Camaro Owner's Manual

5. Push the new bulb into the
socket and reinstall the socket
into the headlamp assembly by
turning it clockwise.
6. Reconnect the electrical
connector.
7. Pull the duct back out of the air
cleaner/filter housing until the
tabs snap the duct back into
position.

Daytime Running

Lamps (DRL)

The up level model vehicle may
have daytime running lamps which
would be located on the fascia.
To replace one of these bulbs:
1. Locate the bulb assembly under
the front fascia.
2. Disconnect the electrical
connector from the bulb
assembly and pull out the bulb
assembly.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
3. Push in the new bulb assembly
to lock it into place.
4. Reconnect the electrical
connector to the bulb assembly.
The base model vehicle daytime
running lamps are the low beam on
the halogen headlamp. If one these
lamps fail, see Headlamps, Front
Turn Signal and Parking Lamps
(Base Vehicle) on page 9 37 or
Headlamps, Front Turn Signal and
Parking Lamps (Up-Level Vehicle)
on page 9 38 for replacement
information.
9-39