Chevrolet 2010 Camaro Owner's Manual page 189

WARNING (Continued)
the way the vehicle handles.
These could cause you to
lose control and crash. Also,
overloading can shorten the
life of the vehicle.
Tire and Loading Information
Label
Label Example
A vehicle specific Tire and
Loading Information label is
attached to the vehicle's center
pillar (B-pillar). With the driver's
door open, you will find the label
attached below the door lock
post. The Tire and Loading
Information label shows the
number of occupant seating
positions (A), and the maximum
vehicle capacity weight (B) in
kilograms and pounds.
The Tire and Loading
Information label also shows
the tire size of the original
equipment tires (C) and the
recommended cold tire inflation
pressures (D). For more
information on tires and inflation
see Tires on page 9 49 and
Tire Pressure on page 9 56.
There is also important loading
information on the Certification
label. It tells you the Gross
Vehicle Weight Rating (GVWR)
and the Gross Axle Weight
I n f o r ma t i o n P r o v i d e d b y :
Driving and Operating
Rating (GAWR) for the front and
rear axle. See Certification
Label later in this section.
Steps for Determining Correct
Load Limit
Locate the statement
1.
The combined weight of
occupants and cargo should
never exceed XXX kg or
XXX lbs on your vehicle's
placard.
Determine the combined
2.
weight of the driver and
passengers that will be
riding in your vehicle.
Subtract the combined
3.
weight of the driver and
passengers from XXX kg
or XXX lbs.
8-13