Replacing Battery Of Transmitter - Subaru Legacy 2014 Owner's Manual

Hide thumbs Also See for Legacy 2014:

Table of Contents

Maintenance and service/Replacing battery

& Replacing battery of trans-

1. Remove the screw on the key head.

2. Open the key head using a flat-head

screwdriver.

3. Remove the transmitter case from the

4. Open the transmitter case by releasing

Negative (−) side facing up

5. Replace the old battery with a new

battery (Type CR1620 or equivalent)

making sure to install the new battery with

the negative (−) side facing up.

6. Put together the transmitter case by

fitting the hooks on the case.

7. Reinstall the transmitter case in the

8. Reinstall the screw on the key head.

After the battery is replaced, the trans-

mitter must be synchronized with the

remote keyless entry system's control

unit. Press either the " " or "

six times to synchronize the unit.

Chapters

Table of Contents

2014 outback