Subaru Legacy 2014 Owner's Manual page 276

displayed, the data is deleted and the
mode changes to the "PHONE SET-
UP" mode.
! Turning the Hands-free power on/
off (type B audio)
You can turn the Hands-free power on or
off. If the Hands-free power is ON, the
registered cell phones are automatically
connected to the system when the ignition
switch is turned to the "Acc" or "ON"
position.
1. Select the "Hands-free Power"/
"Handsfree Power" menu.
2. To turn off the Hands-free power when
the Hands-free power is ON, perform
either of the following procedures.
– Press the talk switch
"Turn off".
– Select "Turn off" by operating the
"TUNE" dial.
To turn on the Hands-free power when the
Hands-free power is OFF, perform either
of the following procedures.
– Press the talk switch
"Turn on".
– Select "Turn on" by operating the
"TUNE" dial.
! System setup
After selecting the "SYSTEM SETUP"
menu, perform the following procedure.
You can select the following menus only
by operating the "TUNE" dial.
! Setting guidance volume
To set the guidance volume, perform the
following procedure.
1. Select the "GUIDANCE VOL" (type A
audio)/"Guidance Volume" (type B audio)
menu.
2. Set the guidance volume by operating
the "TUNE" dial.
! Initializing the registered data
To initialize the registered data, perform
and say
the following procedure.
1. Select the "INITIALIZE" (type A audio)/
"Reset Settings" (type B audio) menu.
2. Select the "CONFIRM" (type A audio)/
"Confirm reset settings?" (type B audio)
menu.
– "INITIALIZED" (type A audio)/"Set-
and say
tings have been reset." (type B audio)
is displayed, the registered data is
initialized and the mode changes to
the last mode.
Audio/Hands–free system
! Selecting language
To select the language, perform the
following procedure.
Type A audio:
1. Select the "SEL LANGUAGE" menu.
2. Select the desired language by oper-
ating the "TUNE" dial.
Type B audio:
"HD/TEXT" button
1. Press and hold the "HD/TEXT" button
to select "Select Langu" menu.
2. Select the preferred language by
operating the "TUNE" dial.
! Device name function (type B
audio)
Select the "Device Name" menu to show
the device name and BD address of the
audio.
5-65