Subaru Legacy 2014 Owner's Manual page 253

5-42
®
Audio/Bluetooth audio
! List audio player function
The names of the registered devices are
spoken by using the list audio player
function. To use the list audio player
function, perform the following procedure.
1. Press the talk switch
audio player".
– The names will then be spoken.
2. Press the talk switch
name is being spoken to select the device.
– After the talk switch is pressed,
"Audio player selected." will be dis-
played.
3. Press the talk switch
following words.
. "Select audio player" (refer to "Se-
lecting device" F5-41)
. "Change name" (refer to "Changing
the registered name" F5-41)
. "Delete audio player" (refer to "De-
leting device" F5-42)
! Setting passkey
1. Press the talk switch
passkey".
2. Press the talk switch
new passkey (a 4 - 8 digit number).
3. Press the talk switch
4. Say "Confirm" to set the passkey, or
say "Go back" to go back.
– If the passkey is set, the new
passkey will be displayed.
! Deleting device
1. Press the talk switch
"Delete audio player".
and say "List
2. Press the talk switch
3. Say the name of the device, or "List
audio player" and select the device (for
while the
details, refer to "List audio player function"
F5-42).
4. Press the talk switch
5. Say "Confirm" to delete the device, or
say "Go back" to go back.
and say the
– If the device is deleted, "Deleted."
will be displayed.
! By operating the dial
Select the menu by turning and pressing
the "TUNE" dial.
NOTE
. Select the "Go Back" menu to go
back to the previous menu.
and say "Set
. If no devices are registered, you can
only select from the following menu.
and say the
– "Pair Audio Players" to register
the device (refer to "Registering
. (pairing) device" F5-42)
– "Set Passkey" to set a new
passkey (refer to "Setting passkey"
F5-43)
! Registering (pairing) device
1. Select the "Pair Audio Players" menu.
and say 2. Select the "Record Name" menu.
3. Say the name of the device to be
. registered.
4. Select the "Confirm pair audio?" menu.
– The passkey will then be shown on
the display.
5. Input the passkey into the device.
.
– If the registering procedure is fin-
ished, "Audio Players Paired." will be
displayed.
– If the registering procedure was not
successful, "Unable to pair audio
players." will be displayed.
! Selecting device
1. Select the "Select Audio Player" menu.
2. Select the preferred device.
3. Select the "Confirm select audio
player?" menu.
4. Select the "From Car" menu or "From
Audio Player" menu.
5. Select the "Confirm select audio
player?" menu.
– If the device is connected, "Se-
lected" will be displayed.
– If the device cannot be connected,