ECS P5SJ-A User Manual page 84

P5SJ-A User's Manual
4: Reference Information – 4.40
Onboard Serial Port 1/2
Sets the I/O address for serial ports 1/2.
3F8/IRQ4 (default of Onboard serial Port 1)
2F8/IRQ3(default of Onboard serial Port 2)
3E8/IRQ4
2E8/IRQ3
Disabled
UART 2 Mode
Sets mode for the second serial port UART. If you select an IR
module type, the second serial port will not be available. The
setting options are:
Standard (default) – (used by COM2 serial port)
ASKIR
HPSIR
Onboard Parallel Port
Sets the I/O address for the onboard parallel port. The setting
options are:
378H/IRQ7 (default)
Disabled
278H/IRQ5
3BCH/IRQ7
If you set this option to 'Disabled', the 'Onboard Parallel Mode'
option below will not appear on the screen.